Signal Processors
Sub Categories
Products in 'Signal Processors'

ZM-9011

ZM-9011 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9011 is a wall mounted remote control panel having 4 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 1-gang electrical box in the wall.

RC-001T

RC-001T Remote Control Module

The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC 001T.

ZM-9003

ZM-9003 Remote Control Panel

The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2 momentary switches. Connecting it to the 9000 series amplifier’s control input terminal permits various controls such as BGM source selection and the sound volume adjustment. It can be mounted in an American standard 2-gang electrical box in the wall.

D-001R

D-001R Line Input Module with DSP

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

M-633D

M-633D Digital Stereo Mixer

The M-633D is a stereo mixer equipped with 12 input channels (6 monaural inputs and 3 stereo inputs) and 6 output channels (2 monaural outputs, 1 stereo output, and 1 stereo recording output). It has 2 monaural channel and 1 stereo channel bus lines, allowing each input signal to be assigned to each bus line individually. 1 Stereo input is located on the front panel for easy connection of audio/MP3 players.

 

D-2000DA1

D-2000DA1 Line Output Module

The D-2000DA1 Line Output Module is designed to be used with the D-2008SP Digital Mixing Processor Unit and features high sound quality. The output levels of each terminal can be individually set to +4dB or -10dB and its output mode independently set to either balanced or unbalanced type by the built-in DIP switch.

D-2000AD1

D-2000AD1 Mic/Line Input Module

The D-2000AD1 is a 4 channel Microphone/line Input Module designed for use with the D-2008SP Digital Mixing Processor Unit

D-2000CB

D-2000CB CobraNet Interface Module

CobraNet was developed by Cirrus Logic, a US company and is a network protocol utilizing Ethernet networks to perform high-quality multi-channel digital transmission. It allows using existing Ethernet equipment such as CAT-5 switching hubs.

ZM-9001

ZM-9001 Remote Control Panel

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.

ZM-9002

ZM-9002 Remote Control Panel

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.