Signal Processors
Sub Categories
Products in 'Signal Processors'

AN-001T

AN-001T Ambient Noise Controller Module

The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the M-9000.
It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle input signals from microphone level (-60dB) to line level (-10dB) by controlling the gain in 9 steps. Phantom power (+24V) can be supplied for condenser microphone use.

SS-9001

SS-9001 Speaker Selector

The SS-9001 is a speaker selector used with the ZP-001T zone paging module. It outputs 2 input signals to 4 different zones.

ZP-001T

ZP-001T Telephone Zone Paging Module

The ZP-001T is a zone paging module designed for use with the M-9000 and functions as interface to connect the M-9000 to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.

C-001T

C-001T Input/Output Control Module

The C-001T is Control I/O expansion module designed for use with the M-9000 and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used.

T-001T

T-001T Dual Line Output Expansion Module with DSP

The T-001T is a plug-in module designed for use with the M-9000 and provide two independent balanced outputs. It can drive load of 600Ω up to +16dB. It can process effect for TONE/EQ/ COMPRESSOR to two inputs independently.

AN-9001

AN-9001 Ambient Noise Sensing Microphone for M-9000

The AN-9001 is an electret condenser microphone designed for ambient
noise sensing. It is used in conjunction with the AN-001T Ambient Noise control module in the M-9000. It can be mounted in an American Standard 1-gang electrical box in the ceiling or wall.

D-001T

D-001T Dual Mic/Line Input Module with DSP

The D-001T is a plug-in module designed for use with the M-9000 and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60dB to -10dB. Phantom power (+24V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

DP-L2

DP-L2 Digital Ambient Noise Controller

Digital audio processor adjusts BGM/announcement sound volume to match changes in listening area noise levels.

The TOA DP-L2 Digital Ambient Noise Controller is the easy, automatic solution to the problem of keeping BGM and announcements audible and understandable when the ambient noise levels at an airport check-in counter or boarding gate, or a shopping mall, restaurant or pub, are higher because a large number of people are present. Furthermore, the DP-L2 also works to keep music and information audio from reaching levels that are irritating to customers and staff when the surrounding ambient noise levels are not so high.

D-983

D-983 Remote Control Module

24 inputs 16 outputs
For external remote control of memory presets, gain control, stereo input selection and channel ON/OFF operation plus tally outputs.

D-972AE

D-972AE Digital Output Modules. Applicable AES/EB

4-channel digital output module. With the use of this module, digital signals can be output, permitting direct connection of the D-901 to equipment having a digital input.