Signal Processors – Page 4 – TOA Corporation.

TOA Corporation.

Signal Processors

Sub Categories

D-2000 Modules

D900 Modules

M-9000 Modules

Mixers

Products in 'Signal Processors'

D-923AE Digital Input Modules. Applicable AES/EBU

2-Channel digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901 to equipment having a digital output. Owing to the
built-in sample rate converter, it can handle signals of various sampling frequencies. 2-Channel digital input module. With the use of this module, digital signals can be input, permitting direct connection of the D-901 to equipment having a digital output. Owing to the
built-in sample rate converter, the module can handle signals of various sampling frequencies.

D-911 VCA Fader Unit

A dedicated VCA fader unit that significantly expands the operational scope of the D-901 Digital Mixer. It adds useful control capabilities when connected to the D-984VC. In such a connection setup, full VCA operation becomes possible, allowing all the D-901’s
12 inputs and 8 outputs channel gain levels and 8 contact controls.

M-243 Stereo Mixer

The M-243 is a 19″ rack-mountable stereo mixer that comes with two monaural inputs, four stereo inputs, one stereo output and two monaural outputs.

D-981 External Remote Control

The D-981 allows external remote control of memory presets, volume control, stereo input selection and channel ON/OFF operation.

D-971R 4 Channel Line Output Module

The D-971R has 4-channel line outputs with standard RCA pin jack.

D-971E 4 Channel Line Output Module

The D-971E has 4-channel line outputs with removable terminal block connectors.

D-971M 4 Channel Line Output Module

The D-971M has 4-channel line outputs with XLR connectors.

D-922E 2 Channel Input Module

The D-922E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

D-922F 2 Channel Input Module

The D-922F is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with XLR connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

D-921E 2 Channel Input Module

The D-921E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors, adjustable input sensitivity as well as phantom power.