Voice Evacuation Systems
The EN 54 Marque - TOA's Commitment to Quality

EN 54 is a standard marque of the European Union (EU) for fire detection and fire alarms systems. The relevant parts which concerns the Voice Alarm manufactures are Part 4 which covers power supplies, Part 16 which covers voice alarm control and indicating equipment (VACIE) and finally, Part 24 which covers speakers. In addition, all VA speakers should also meet the requirements of BS5839-8
Sub Categories
Products in 'Voice Evacuation Systems'

VP-2241

VP-2241 Power Amplifier

VP-2241 (240 W-by-1 channel)
Power Amplifier uses the VP-200VX or VP-200VX-BGM Power Amplifier Input Module per channel.

VP-2064

VP-2064 Power Amplifier

VP-2064 (60 W-by-4 channels)
Power Amplifier uses the VP-200VX or VP-200VX-BGM Power Amplifier Input Module per channel.

VX-200SE

VX-200SE Equaliser Card

The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP Pilot Tone Detection module or VX-200SZ Impedance Detection module.

VX-200SI

VX-200SI Control Input Module

  • TOA’s VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.
VX-200SO

VX-200SO Control Output Module

TOA’s VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.

VX-200SP

VX-200SP Pilot Tone Detection Module

The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.

VX-200SZ

VX-200SZ Audio Signal Output Module

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing inpedance readings, and ground fault.

VX-200XI

VX-200XI Audio Input Module

The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.

VX-200XR

VX-200XR Remote Microphone Input Module

The VX-200XR module is designed to be used with the RM-200X Remote microphone or RM-200XF Fireman’s Microphone. Insert this module into the VX-2000’s input module slot for each Remote or Fire Microphone(s) used in the system.

WB-RM200

WB-RM200 Wall Mounting Bracket

The WB-RM200 is to mount RM-200X, RM-200M and RM-210 on the wall.