Voice Evacuation Systems
The EN 54 Marque - TOA's Commitment to Quality

EN 54 is a standard marque of the European Union (EU) for fire detection and fire alarms systems. The relevant parts which concerns the Voice Alarm manufactures are Part 4 which covers power supplies, Part 16 which covers voice alarm control and indicating equipment (VACIE) and finally, Part 24 which covers speakers. In addition, all VA speakers should also meet the requirements of BS5839-8
Sub Categories
Products in 'Voice Evacuation Systems'

RM-200XF

RM-200XF Fireman’s Microphone for VX-2000

A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.

RM-200X

RM-200X Remote Microphone

The RM-200X is a dedicated unit for the VX-2000 system, and permits emergency broadcast as well as general-purpose broadcast. VX-200SO

VX-2000SF

VX-2000SF Surveillance Frame

The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units.
A total of 10 units of output modules and control modules can be installed per VX-2000SF.

Followung modules can be used:

  • VX-200SP Pilot Tone Detection module
  • VX-200SP-2 Pilot Tone Detection module with end-of-line module
  • VX-200SZ-2 Impedance Detection module with A/B loudspeaker lines
  • VX-200SI Control Input module
  • VX-200SO Control Output module

  • EV-200

    EV-200M Voice Announcement Board

    The EV-200M is playback-only Voice Announcing board to play back the messages recorded on TOA’s EV-350R.The EV-200M is designed to built in the VM-2000 series amplifiers.

    U-01F Unbalanced Auxiliary Input Module with XLR connector

    Input module for 900 Series Amplifiers/VX-2000 System Manager for unbalanced, line level equipment such as AM/FM tuners, tape decks, MP3 players or CD players.
    Including gain control.

    U-01S Auxiliary Input Module with 3 pin Screw Terminal

    • Input module for 900 Series Amplifiers/VX-2000 System Manager for unbalanced, line level equipment such as AM/FM tuners, tape decks, MP3 players or CD players.
    • Including gain control.
    D-936R

    D-936R Stereo input module

    • The D-936R is a 4 stereo input module can be used to send one or a L+R mix of all the 4 stereo inputs to the D-901. Stereo/mono mode can be set on the front panel.
    VP-200VX-BGM

    VP-200VX-BGM Power Amplifier Input Module with Program Input

    The VP-200VX-BGM Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
    The input module is designed to mix the Audio signal of the VX-2000 system with an Audio signal of an external input. The latter can be muted by a control input, and supports a balanced mono or unbalanced stereo Audio signal. Its level can be adjusted. All surveillance functions of the VX-2000 system will be supported.