SX-2000 Series
Introducing a scalable new system for configuring versatile and highly effective PA applications. The system features new matrixing capabilities, so a single system can have its components distributed in different locations under centralized control. Ideal for large scale installations ranging over multiple buildings as well as local systems, the versatile SX-2000 Series is particularly well-suited for airports and railway stations, factories, shopping malls and large offices. The system's versatility is ensured by such features as a dual power source and redundant backups for fail-safe operation, making it a cost-effective solution for virtually any installation, and without long lead times or the expense of a custom system. A fireman’s microphone feature is also included, for enhanced effectiveness in an emergency. SX-2000 Series components enable creation of an ideal system for all sorts of application requirements. SX-2000 is certified with VDE 0833-4, EN 60849 and EN 54-16

Integrated public address and voice alarm
Digital surveillance
Decentralized system capability
DSP for clear announcements & enjoyable BGM
Four different simultaneous emergency messages
Low cabling efforts
Max. 64 Audio Inputs / 256 Audio Outputs
Up to 1,416 Contact Inputs and Contact Outputs
Certified with VDE 0833-4, EN 60849 and EN 54-16
Sub Categories
Products in 'SX-2000 Series'

SX-2100AI

SX-2100AI Audio Input Unit

The SX-2100AI is an audio input of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any input channel can be monitored using the internal speaker. It is also equipped with 16 control inputs, and 16 control outputs. It is equipped with two power inputs, allowing for a redundant power system.

SX-2000SM

SX-2000SM System Manager

SX-2000SM can be used in combination with an optional audio input unit, audio output unit, and remote microphone of the SX-2000 Series to make up a complete matrix system and can perform audio signal routing and priority control for the entire system. The SX-2000SM itself is equipped with 8 control inputs, 8 control outputs, failure status outputs, failure data inputs/switches, access indicators mode indicators and failure indicators enabling a wide rage of controls and status monitoring. Each control can be performed by way of a CF card inserted into the SX-2000SM unit. Operations of the entire system can be recorded and their contents stored on a CF card as an operation log.
The SX-2000SM also features two power inputs making possible the creation of a dualredundant power system.

D-971R

D-971R 4 Channel Line Output Module

The D-971R has 4-channel line outputs with standard RCA pin jack.

D-971E

D-971E 4 Channel Line Output Module

The D-971E has 4-channel line outputs with removable terminal block connectors.

D-971M

D-971M 4 Channel Line Output Module

The D-971M has 4-channel line outputs with XLR connectors.

D-922E

D-922E 2 Channel Input Module

The D-922E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

D-922F

D-922F 2 Channel Input Module

The D-922F is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with XLR connectors and DIP switches to adjust input sensitivity, phantom power and ground lifting.

D-921E

D-921E 2 Channel Input Module

The D-921E is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with removable terminal block connectors, adjustable input sensitivity as well as phantom power.

D-921F

D-921F 2 Channel Input Module

The D-921F is a 2-channel input module that accepts mic and line level inputs (selectable). It is equipped with XLR connectors, adjustable input sensitivity as well as phantom power.

VX-2000PF

VX-2000PF EN 54-4 Power Supply Frame

The VX-2000PF permits the VX-2000PS Power Supply Unit to be mounted in an equipment rack. Up to three VX-200PS units can be installed in the unit.