VX-2000 Series
The most important factor in any emergency system is total reliability.

TOA brings its accumulated expertise in producing public address and surveillance systems that are absolutely relied on in numerous installations around the world. Fully compliant with EN54 and BS5839 prt 8 standards allow use in the most demanding environments, the VX-2000 outstanding features include sophisticated failure detection measures that constantly check components and speaker lines for any faults or abnormalities which are brought to the notice of concerned personnel via indicators and buzzers.

The VX-2000 has been designed to offer a very high level of versatility allowing its use in various environments and features a scalable architecture that can be easily expanded as requirements dictate. A fully modular configuration facilitates assembling a system that is ideally optimized for a particular application with specific modules. The VX-2000 offers a high-performance cost-effective solution to any environment’s voice evacuation and public address requirements. The VX-2000 system can be configured to accept a maximum of 8 input slots for various input source modules, up to 8 remote microphones including 4 Fireman’s Microphones, 2 voice-announcement boards as well as a built-in announcement chime. Up to 80 output zones with A/B wiring.
Sub Categories
Products in 'VX-2000 Series'

VP-2064

VP-2064 Power Amplifier

VP-2064 (60 W-by-4 channels)
Power Amplifier uses the VP-200VX or VP-200VX-BGM Power Amplifier Input Module per channel.

VX-200SE

VX-200SE Equaliser Card

The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP Pilot Tone Detection module or VX-200SZ Impedance Detection module.

VX-200SI

VX-200SI Control Input Module

  • TOA’s VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.
VX-200SO

VX-200SO Control Output Module

TOA’s VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.

VX-200SP

VX-200SP Pilot Tone Detection Module

The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.

VX-200SZ

VX-200SZ Audio Signal Output Module

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing inpedance readings, and ground fault.

VX-200XI

VX-200XI Audio Input Module

The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.

VX-200XR

VX-200XR Remote Microphone Input Module

The VX-200XR module is designed to be used with the RM-200X Remote microphone or RM-200XF Fireman’s Microphone. Insert this module into the VX-2000’s input module slot for each Remote or Fire Microphone(s) used in the system.

WB-RM200

WB-RM200 Wall Mounting Bracket

The WB-RM200 is to mount RM-200X, RM-200M and RM-210 on the wall.

RM-200XF

RM-200XF Fireman’s Microphone for VX-2000

A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.