VX-2000 Series
The most important factor in any emergency system is total reliability.

TOA brings its accumulated expertise in producing public address and surveillance systems that are absolutely relied on in numerous installations around the world. Fully compliant with EN54 and BS5839 prt 8 standards allow use in the most demanding environments, the VX-2000 outstanding features include sophisticated failure detection measures that constantly check components and speaker lines for any faults or abnormalities which are brought to the notice of concerned personnel via indicators and buzzers.

The VX-2000 has been designed to offer a very high level of versatility allowing its use in various environments and features a scalable architecture that can be easily expanded as requirements dictate. A fully modular configuration facilitates assembling a system that is ideally optimized for a particular application with specific modules. The VX-2000 offers a high-performance cost-effective solution to any environment’s voice evacuation and public address requirements. The VX-2000 system can be configured to accept a maximum of 8 input slots for various input source modules, up to 8 remote microphones including 4 Fireman’s Microphones, 2 voice-announcement boards as well as a built-in announcement chime. Up to 80 output zones with A/B wiring.
Sub Categories
Products in 'VX-2000 Series'

RM-200X

RM-200X Remote Microphone

The RM-200X is a dedicated unit for the VX-2000 system, and permits emergency broadcast as well as general-purpose broadcast. VX-200SO

VX-2000SF

VX-2000SF Surveillance Frame

The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units.
A total of 10 units of output modules and control modules can be installed per VX-2000SF.

Followung modules can be used:

  • VX-200SP Pilot Tone Detection module
  • VX-200SP-2 Pilot Tone Detection module with end-of-line module
  • VX-200SZ-2 Impedance Detection module with A/B loudspeaker lines
  • VX-200SI Control Input module
  • VX-200SO Control Output module

  • EV-200

    EV-200M Voice Announcement Board

    The EV-200M is playback-only Voice Announcing board to play back the messages recorded on TOA’s EV-350R.The EV-200M is designed to built in the VM-2000 series amplifiers.

    U-01F Unbalanced Auxiliary Input Module with XLR connector

    Input module for 900 Series Amplifiers/VX-2000 System Manager for unbalanced, line level equipment such as AM/FM tuners, tape decks, MP3 players or CD players.
    Including gain control.

    U-01S Auxiliary Input Module with 3 pin Screw Terminal

    • Input module for 900 Series Amplifiers/VX-2000 System Manager for unbalanced, line level equipment such as AM/FM tuners, tape decks, MP3 players or CD players.
    • Including gain control.
    VP-200VX-BGM

    VP-200VX-BGM Power Amplifier Input Module with Program Input

    The VP-200VX-BGM Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
    The input module is designed to mix the Audio signal of the VX-2000 system with an Audio signal of an external input. The latter can be muted by a control input, and supports a balanced mono or unbalanced stereo Audio signal. Its level can be adjusted. All surveillance functions of the VX-2000 system will be supported.