Components
Sub Categories
Products in 'Components'

VX-2000

VX-2000 System Manager

The VX-2000 System Manager has been designed and built to meet British and European standards: BS5839 part 8 and EN 60849. The VX-2000 is an input matrix unit that assigns input signals to 4 audio buses, and functions as the VX-2000 system’s main controller.

A total of up to 8 units of the VX-200XI, VX-200XR, and 900 Series input modules can be mounted in a System Manager.
The VX-2000 can control audio signal routing, priorities, and peripheral equipment, while input and output control settings are performed by way of a PC.

Up to 2,000 system events and failures can also be recorded, and the log can be viewed from a PC.

U-03R Unbalanced Line Input with RCA connectors

For unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Including Gain Control and high/low cut filters.

VX-200SE

VX-200SE Equaliser Card

The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP Pilot Tone Detection module or VX-200SZ Impedance Detection module.

VX-200SI

VX-200SI Control Input Module

  • TOA’s VX-200SI Control Input Module is used to increase the number of control inputs to be used in the VX-2000 system. It features 16 control inputs and is mounted in the VX-2000SF Surveillance Frame.
VX-200SO

VX-200SO Control Output Module

TOA’s VX-200SO Control Output Module is used to increase the number of control outputs to be used in the VX-2000 system. It features 16 control outputs and is mounted in the VX-2000SF Surveillance Frame.

VX-200SP

VX-200SP Pilot Tone Detection Module

The VX-200SP is an audio signal output module of the VX-2000 system with speaker line pilot tone detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by monitoring for the presence of a pilot signal, and ground fault.

VX-200SZ

VX-200SZ Audio Signal Output Module

The VX-200SZ is an audio signal output module of the VX-2000 system with speaker line impedance detection. This module is to be mounted in the VX-2000SF Surveillance Frame and detects speaker line short circuits, open circuits by comparing inpedance readings, and ground fault.

VX-200XI

VX-200XI Audio Input Module

The VX-200XI module is designed to be used in conjunction with the VX-2000 System Manager, and comes with control input terminals, low-cut and high-cut filters, and gain controls.

VX-200XR

VX-200XR Remote Microphone Input Module

The VX-200XR module is designed to be used with the RM-200X Remote microphone or RM-200XF Fireman’s Microphone. Insert this module into the VX-2000’s input module slot for each Remote or Fire Microphone(s) used in the system.

VX-2000SF

VX-2000SF Surveillance Frame

The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units.
A total of 10 units of output modules and control modules can be installed per VX-2000SF.

Followung modules can be used:

  • VX-200SP Pilot Tone Detection module
  • VX-200SP-2 Pilot Tone Detection module with end-of-line module
  • VX-200SZ-2 Impedance Detection module with A/B loudspeaker lines
  • VX-200SI Control Input module
  • VX-200SO Control Output module

  • EV-200

    EV-200M Voice Announcement Board

    The EV-200M is playback-only Voice Announcing board to play back the messages recorded on TOA’s EV-350R.The EV-200M is designed to built in the VM-2000 series amplifiers.