M-9000 Modules

M-9000M2

M-9000M2 Digital Matrix Mixer

The M-9000M2 Digital Matrix Mixer combines a modular matrix mixer and digital signal processor (DSP) in a compact two rack package. This versatile modular unit is ideal for multi-zone paging, music distribution and room-combining applications and combines an enhanced GUI programming interface with exceptional audio quality. The M-9000M2 enables easily configured custom systems with up to eight mic/line inputs and eight outputs. It has two output channels with built-in DSP, including ten-band parametric EQ, compressor, delay, and more.

SO-MIX-T
SO-MIX-T

SO-MIX-T-24V Remote Mixer

The SO-MIX-T-24V is a remote mixer input panel with an XLR microphone and RCA line level input. Both inputs are mixed to one output. Individual volume control with joint bass and treble control. Automatic mix with selectable Talkover function. 30dB, Talkover time: 3 seconds. Fits in standard 1-gang 50mm backbox.

 

SS-9012-EB

SS-9012 EB Speaker Selector

SS9012 is a speaker selector used in conjunction with 9000M2 Series mixer amplifiers or other paging equipment. It selectively distributes each of 2 amplified inputs of the same 12 output zones by the status of corresponding contact closure input.

RM-9012C

RM-9012 Paging Microphone

  • Simple, low-cost solution for multi-zone paging with minimal equipment
  • Works with 9000M2 GUI software v2.0
  • In Paging Matrix-New Paging sync function allows up to 12 synchronized contact-outputs along with each page event
  • Each sync point controls an independent C-OUT connection, which in turn activates the independent speaker outputs on the Q-SS9012PS
  • High-sensitivity electret-condenser gooseneck mic for clear voice
  • 12 zone select buttons, All Call, Clear
  • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
  • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)
NM-01

NM-01 Sound Masking Module

The NM-01 is a sound masking module to be used in conjunction with TOA’s 9000M2, series.

ZM-9013

ZM-9013 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9013 is a wall mounted remote control panel having 8 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 2-gang electrical box in the wall.

ZM-9014

ZM-9014 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9014 is a wall mounted remote control panel having 4 buttons and 1 volume control knob. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons, and input or output channel’s volume adjustment to the volume control knob. It can be mounted in an American standard 2-gang electrical box in the wall.

ZM-9012

ZM-9012 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9012 is a wall mounted remote control panel having a volume control knob. It is used in conjunction with the RC-001T Remote control module. The volume control knob can be set on which channel of input or output to adjust volume level. It can be mounted in an American standard 1-gang electrical box in the wall.

ZM-9011

ZM-9011 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9011 is a wall mounted remote control panel having 4 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 1-gang electrical box in the wall.

ZM-9003

ZM-9003 Remote Control Panel

The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2 momentary switches. Connecting it to the 9000 series amplifier’s control input terminal permits various controls such as BGM source selection and the sound volume adjustment. It can be mounted in an American standard 2-gang electrical box in the wall.

RC-001T

RC-001T Remote Control Module

The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC 001T.