D-2012C

D-2012C Remote Console Unit

  • Overview
  • Specification
  • Downloads

  • The D-2012C, allows input and output channel signal levels to be monitored, volume changes made as well as recalling preset memory settings, and contact control.

  • Specification
    Power Source AC mains,50/60Hz
    Power Consumption 18W
    Volume Adjustment 100mm motorized fader x 12,Rotary encoder x 8
    Line Input 1 channel (stereo),+10 to -20dB,10kΩ,unbalanced,RCA Pin-jack
    Headphone Output Stereo 100mW + 100mW (32Ω load) standard stereo phone-jack
    Monitor Bus 1 stereo input,1 stereo output
    LAN
    Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) RJ45 connector,Connected via a switching hub
    Network Protocol: TCP/IP
    Connection Cable: Shielded twisted pair (STP) Category 5 or higher LAN cable
    Maximum cable distance: 100m (109.36 yd)(between D-2008SP and switching hub)
    Control RS-232C,D-sub connector (9 pins) Used for maintenance use
    Dimensions 482(W) x 266(H) x 138(D)mm
    Weight 6.6kg (14.55lb)
    Accessory Power cord (2m (6.5ft))x 1,Rack mounting screw x 4,Fader knob (yellow) x 3,Fader knob (red) x 3,Cord clamp (fitting screw) x 1


Related Products

D-2008SP

D-2008SP Digital Mixing Processor Unit

The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack. A built in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control parts can accept optional plug-in modules, making the unit have a maximum of 32 inputs or outputs and up to 2 control modules.

Leave a Reply