M-9000M2

M-9000M2 Digital Matrix Mixer

  • Overview
  • Specification
  • Downloads

  • The NEW TOA M-9000M2 Digital Matrix Mixer redefines the mixer category, by combining a modular matrix mixer and digital signal processor (DSP) in a compact two-rack package. This versatile new modular unit is ideal for multi-zone paging, music distribution and room-combining applications.

    The M-9000M2 combines an enhanced GUI programming interface with exceptional audio quality.

    The M-9000M2 enables easily configured custom systems with up to eight mic/line inputs and eight outputs. The M-9000M2 has two output channels with built-in DSP, including ten-band parametric EQ, compressor, delay, and more.

    Input and output modules include additional DSP. A new integrated operating mode provides powerful functionality for both simple mixing and complex multi-zone paging applications. Features include telephone zone paging, automatic microphone mixing and ambient noise control.

  • Specification
    Power Source AC Mains, 50/60Hz
    Power Consumption 40W
    Audio Input Max. 8 channels, modular construction (modules optional)
    Audio Output Preamplifier output 1, 2: 0dB*, 600Ω, balanced, removable terminal block (3 pins)
    Module Slot Analog input (slot 1 – 8): -10dB*, 10kΩ, unbalanced
    Digital input (slot 1 – 4): 24 bit/48kHz
    MIX output (slot 1 – 8); -14dB*, 330Ω (CH 1 prefader output), unbalanced
    Digital output (slot 5 – 7): 24 bit/48kHz
    Power supply (slot 1 – 8); +24V, -24V, +6V DC
    Frequency Response 20Hz – 20kHz +1, -3dB
    Total Harmonic Distortion 0.008% (@22kHz LPF, 1kHz, +10 dB* output)
    S/N Ratio At input short, 20Hz – 20kHz, ALL FLAT or OFF setting
    Output volume min.: 90dB
    Output volume max.: 61dB (input 1 vol.: 0dB,other inputs:OFF)
    Crosstalk 64dB or more (at 20kHz)
    Tone Control Bass: +/-12dB (at 100Hz), Treble: +/-12dB (at 10kHz)
    Parametric EQ 10 bands, Freq: 20Hz – 20kHz, 31 points, Variable range: +/- 12dB, Q: 0.3 – 5
    Speaker Equalizer 10 (setup software has 30 TOA speaker presets)
    High-pass Filter -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 steps
    Low-pass Filter -12dB/oct, Variable frequency range: 20Hz – 20kHz, 31 steps
    Compressor Depth: 1 – 5
    Delay 0 – 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2)
    Scene/Event Memory 32
    Auxiliary Function Key lock function
    Control Input/Output RS-232C*2, D-sub connector (9P, female)
    Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: 1mA or less,removable terminal block (14 pins)
    Control output: 4 outputs, open collector output, withstand voltage: 27V DC,control current: 50mA, removable terminal block (14 pins)
    Remote volume: 2 channels, connect a10kΩ/linear taper variable resistor or input the DC voltage of 0 to 10V, removable terminal block (14 pins)
    Operating Temperature -10° to 40°C (14° to 104°F)
    Operating Humidity 35% to 80% RH (no condensation)
    Finish Panel: aluminum, hair-line, black; Case: surface-treated steel plate, black paint
    Dimensions (W × H × D) 420 × 107.6 × 353mm (16.54″ × 4.24″ ×13.9″)
    Weight 6 kg (13.23 lbs.)
    Acessories Blank panel…7, Blank panel mounting screws….14
    Removable terminal plug(3pins)…2
    Renovable terminal plug (14 pins)…1, CD…1

    (*2) Allowing it to be controlled by a control system such as AMX and Crestron through RS-232C port


Related Products

CP-9500M2

CP-9500M2 EB Matrix Mixer Amplifier

The CP-9550M2 Matrix Mixer Amplifier is the compact solution for conference rooms, gymnasiums and restaurants and can be used in conjunction with optional modules as a mixer or paging amplifier by settings, depending on the application.

CP-9500M2
CP-9500M2

CP-9550M2 EB Matrix Mixer Amplifier

The CP-9550M2 Matrix Mixer Amplifier is the compact solution for conference rooms, gymnasiums and restaurants and can be used in conjunction with optional modules as a mixer or paging amplifier by settings, depending on the application.

SO-MIX-T
SO-MIX-T

SO-MIX-T-24V Remote Mixer

The SO-MIX-T-24V is a remote mixer input panel with an XLR microphone and RCA line level input. Both inputs are mixed to one output. Individual volume control with joint bass and treble control. Automatic mix with selectable Talkover function. 30dB, Talkover time: 3 seconds. Fits in standard 1-gang 50mm backbox.

 

RM-9012C

RM-9012C-EB Paging Microphone

This product is a variant of the following item. Click on the link below to see all variants and options:
RM-9012 Paging Microphone

  • Simple, low-cost solution for multi-zone paging with minimal equipment
  • Works with 9000M2 GUI software v2.0
  • In Paging Matrix-New Paging sync function allows up to 12 synchronized contact-outputs along with each page event
  • Each sync point controls an independent C-OUT connection, which in turn activates the independent speaker outputs on the Q-SS9012PS
  • High-sensitivity electret-condenser gooseneck mic for clear voice
  • 12 zone select buttons, All Call, Clear
  • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
  • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)
RM-9012C

RM-9012-EB Paging Microphone

This product is a variant of the following item. Click on the link below to see all variants and options:
RM-9012 Paging Microphone

  • Simple, low-cost solution for multi-zone paging with minimal equipment
  • Works with 9000M2 GUI software v2.0
  • In Paging Matrix-New Paging sync function allows up to 12 synchronized contact-outputs along with each page event
  • Each sync point controls an independent C-OUT connection, which in turn activates the independent speaker outputs on the Q-SS9012PS
  • High-sensitivity electret-condenser gooseneck mic for clear voice
  • 12 zone select buttons, All Call, Clear
  • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
  • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)
RM-9012C

RM-9012 Paging Microphone

  • Simple, low-cost solution for multi-zone paging with minimal equipment
  • Works with 9000M2 GUI software v2.0
  • In Paging Matrix-New Paging sync function allows up to 12 synchronized contact-outputs along with each page event
  • Each sync point controls an independent C-OUT connection, which in turn activates the independent speaker outputs on the Q-SS9012PS
  • High-sensitivity electret-condenser gooseneck mic for clear voice
  • 12 zone select buttons, All Call, Clear
  • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
  • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)
NM-01

NM-01 Sound Masking Module

The NM-01 is a sound masking module to be used in conjunction with TOA’s 9000M2, series.

ZM-9014

ZM-9014 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9014 is a wall mounted remote control panel having 4 buttons and 1 volume control knob. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons, and input or output channel’s volume adjustment to the volume control knob. It can be mounted in an American standard 2-gang electrical box in the wall.

ZM-9013

ZM-9013 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9013 is a wall mounted remote control panel having 8 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 2-gang electrical box in the wall.

ZM-9012

ZM-9012 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9012 is a wall mounted remote control panel having a volume control knob. It is used in conjunction with the RC-001T Remote control module. The volume control knob can be set on which channel of input or output to adjust volume level. It can be mounted in an American standard 1-gang electrical box in the wall.

ZM-9011

ZM-9011 Remote Control Panel

Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9011 is a wall mounted remote control panel having 4 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 1-gang electrical box in the wall.

ZM-9003

ZM-9003 Remote Control Panel

The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2 momentary switches. Connecting it to the 9000 series amplifier’s control input terminal permits various controls such as BGM source selection and the sound volume adjustment. It can be mounted in an American standard 2-gang electrical box in the wall.

RC-001T

RC-001T Remote Control Module

The RC-001T is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC 001T.

D-001R

D-001R Line Input Module with DSP

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

ZM-9002

ZM-9002 Remote Control Panel

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.

ZM-9001

ZM-9001 Remote Control Panel

The ZM-9002 is a remote control switch/volume panel used with the M-9000. It adds 4 amplifier control inputs and 1 remote volume control, and can be mounted in an American Standard 1-gang electrical box in the wall.

SS-9001

SS-9001 Speaker Selector

The SS-9001 is a speaker selector used with the ZP-001T zone paging module. It outputs 2 input signals to 4 different zones.

AN-001T

AN-001T Ambient Noise Controller Module

The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the M-9000.
It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle input signals from microphone level (-60dB) to line level (-10dB) by controlling the gain in 9 steps. Phantom power (+24V) can be supplied for condenser microphone use.

ZP-001T

ZP-001T Telephone Zone Paging Module

The ZP-001T is a zone paging module designed for use with the M-9000 and functions as interface to connect the M-9000 to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.

C-001T

C-001T Input/Output Control Module

The C-001T is Control I/O expansion module designed for use with the M-9000 and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used.

T-001T

T-001T Dual Line Output Expansion Module with DSP

The T-001T is a plug-in module designed for use with the M-9000 and provide two independent balanced outputs. It can drive load of 600Ω up to +16dB. It can process effect for TONE/EQ/ COMPRESSOR to two inputs independently.

D-001T

D-001T Dual Mic/Line Input Module with DSP

The D-001T is a plug-in module designed for use with the M-9000 and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60dB to -10dB. Phantom power (+24V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

M-9000

M-9000 Digital Matrix & Mixer (Discontinued)

The TOA M-9000 Series Digital Matrix Mixer features a compact design that fits in a two rack space package. The versatile new Mixer is ideal for multi-zone paging, music distribution and room-combining applications.
The M-9000 includes eight module ports allowing designers to easily configure custom systems with up to eight mic/line inputs and eight outputs. The M-9000 chassis has two channels of built-in digital signal processing (DSP) with ten band parametric EQ, compressor, eight level ducking and more. Input and output modules provide additional DSP.
Two discrete operation modes, “Mixer” and “Matrix”, allow the M-9000 to be used in both simple mixing and complex multizone paging applications. Versatile features include telephone
zone paging, automatic microphone mixing and ambient noise control.

SV-200M

SV-200MA Surveillance Board (Discontinued)

The SV-200MA Surveillance Board consists of an SV-200M board and an SV extension board to be used in combination. Installing the SV-200MA board inside the VM-2120 or VM-2240 amplifier adds the following functions to the VM amplifier’s functions.

 

AX-1000A

AX-1000A 8 Channel Modular Automatic Mixer (Discontinued)

  • 8 channels accept TOA’s 900 Series modules
  • Automatically adjusts system level, allowing maximum acoustic gain with out feedback, regardless of the number of active microphone inputs.
  • Channels gate silently for ultimate system response and clarity.
  • Ten AX-1000A may be linked for a maximum of 80 input channels.
  • Rack mountable in 3 spaces (ears included).
  • Each channel features:
  • Direct output (pre-gate)
  • Logic output (open collector)
  • Attenuation depth control (0 to -40dB)
  • Master functions:
  • NOM Attenuation control (0 to 20log NOM) with standard 10log NOM in center click.
  • Remote master volume.
  • Priority override for either muting of DIP switch selected channels or of input modules with muting capability.

Leave a Reply