IR-702T

IR-702T Infrared Wireless Tuner

  • Overview
  • Specification
  • Downloads

  • Comes with a built-in 2-channel fixed-frequency tuner.
    Enables installation of up to 4 infrared light receivers per unit
    Equipped with signal reception light and knob for microphone volume control.

    • Two outputs, one with a MIX output switch allowing output of mixed voices  from channels A and B.
    • Rack-mountable with optional brackets (MB-WT3/MB-WT4)

     

  • Specifications
    Power Source AC mains 50/60Hz (supplied from the accessory AC adaptor)
    Power Consumption 15W or less
    Receiving Frequency Channel A:3.100MHz/Channel B:3.350MHz
    Receiver Sensitivity S/N ratio over 50dB
    S/N Ratio 61dB or more
    Tone Squelch Frequency 32.768kHz
    Infrared Receiver Input 75Ω,BNC jack x 2 (Infrared wireless receiver’s power source:24V DC, max.220mA in total of 2 terminals)
    Output Channel A and B: -10dB (±4.8kHz deviation, at volume level max.) 600Ω, electronically balanced, 3 pole phone jack Note:Channel A switchable to mixer output
    Frequency Response 100Hz – 12kHz
    Operating Temperature -10ºC to +50ºC
    Operating Humidity 30% to 85% RH
    Finish Case: ABS resin, black
    Dimensions 210(W) x 44(H) x 210.9(D)mm
    Weight 630g (unit only)
    Accessories AC adaptor x 1, Power cord(2m) x 1, Cord with a phone plug(1m) x 1, Colour Label (6 colours) x 1, Rubber foot x 4


Related Products

IR-500R

IR-500R Wall-Mount Receiver

Supplied wall-mounting brackets facilitate installation.
Can be installed in an electric circuit box.
Equipped with power indicator LED.
Reception area is up to approx. 15m line of sight.
Infrared light reception angle can be changed.

IR-510R

IR-510R Ceiling-Mount Receiver

Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.

IR-520R

IR-520R Wall-Mount Reciver

Can be mounted on a wall and on a microphone stand.
Supplied stand-mounting brackets facilitate installation.

 

MB-WT4

MB-WT4 Rack Mount Bracket Kit

  • Bracket (x 2) with connector.
  • For rack-mounting two WT-3800 unit.
MB-WT3

MB-WT3 Rack Mount Bracket Kit

  • Bracket (x 2) with connector and blank box.
  • For rack-mounting one WT-3800 unit.
YW-1024

YW-1024 Distributor (4 coaxial connectors)

The YW-1024 is a distributor that can work in the frequency range of 1.6 to 1000 MHz (except 50 to 70 MHz). Power passing type permits easy power supply.

YW-1022

YW-1022 Distributor (2 coaxial connectors)

The YW-1022 is a distributor that can work in the frequency range of 1.6 to 1000 MHz (except 50 to 70 MHz). Power passing type permits easy power supply.

Leave a Reply