CP-9500M2

CP-9500M2 EB Matrix Mixer Amplifier

  • Overview
  • Specification
  • Downloads


  • The CP-9500M2 Matrix Mixer Amplifier is the compact solution for conference rooms, gymnasiums and restaurants and can be used in conjunction with optional modules as a mixer or paging amplifier by settings, depending on the application.

    Features:

    • 500W Dual Channel Power Amplifier
    • Efficient – digital power amplifier efficiency is as high as 80 to 90%, and more than 60% reduction in energy consumption compared to analog power amplifiers
    • High stability – provide comprehensive protection circuitry in response to excessive current load, abnormal short circuit, DC voltage output and the heat sink temperature rises.
    • Independent power supply – each channel has its own independent power supply design. Even if a channel fails, the other channel will not be affected.
    • Multiple Input Priority Modes sets priority order when multiple inputs with the same priority level and output assignment are broadcast
    • Stereo Link mirrors all the setting of one channel to the adjacent channel, reducing redundant setup tasks for stereo signals. Useful for stereo zone applications
    • Speaker Line Switching – Select up to four speaker lines from a single amplifier output using optional model SS-9001 Speaker Selector and AD-246 Power Supply
    • RS-232C serial port – allows upload and download of programming templates and firmware upgrades as well as real time control of various parameters. Control protocol is available and AMX and Creston control modules and also available

  • Specifications
    Power Supply 220-240V AC (50/60Hz)
    Power Consumption 220W (according to IEC/EN 60065)
    Audio Input Max. 8 channels, modular construction (modules optional)
    Speaker Output 500W x 2, 350W, connector:M4 screw terminal
    Amplifier Class D (100 V)
    Module Slot Analog input (slot 1-8): -10dB, 10k Ohm, unbalanced
    Control Input/Output RS-232C, D sub connector (9P, female) Control input: 4, no-voltage make contact, open voltage: 3.3V DC short circuit current: 1mA or less, removable terminal block (14 pins) Control Output: 4 outputs, open collector output withstand voltage: 27V DC, control current: 50mA, removable terminal block (14 pins) REmote volume: 2 channels, connect a 10k linear taper variable resistor or input the DC voltage of 0 to 10V, removable terminal block (14 pins)
    Signal Processing 24 bit/ 48kHz
    Cross Talk >60dB (20kHz)
    Functions Tone control bass: +/- 12dB (at 100Hz), Treble: +/-12dB (at 10kHz) Parametric EQ 10 bands, Freq: 20Hz – 20kHz, 31 steps, Variable rang: +/- 12dB, Q: 0.3-5 Speaker Equalizer 10 (setup software has 30 TOA speaker presets) High pass filter -12B/oct, Variable frequency range: 20Hz – 20kHz, 31 steps. Low pass filter -12B/oct, Variable frequency range: 20Hz – 20kHz, 31 steps.Compressor depth: 1-5 Delay0-40ms (1 ms steps). max. 40ms (CH1 + CH2)Scene/Event Memory 32 Auxiliary Function key lock function
    Frequency Response 20 Hz-20kHz
    THD <0.3%
    S/N Ratio 85dB
    Operating Temperature -10­°C to +40°C
    Operating Humidity 35% to 80% RH (no condensation)
    Finish Panel: Aluminium, hair-line, black. Case: surface-treated steel plate, black paint
    Dimensions 420 (W) x 107.6 (H) x 415 (D) mm
    Weight 9.6kg

Related Products

CP-9500M2
CP-9500M2

CP-9550M2 EB Matrix Mixer Amplifier

The CP-9550M2 Matrix Mixer Amplifier is the compact solution for conference rooms, gymnasiums and restaurants and can be used in conjunction with optional modules as a mixer or paging amplifier by settings, depending on the application.

M-9000M2

M-9000M2 Digital Matrix Mixer

The M-9000M2 Digital Matrix Mixer combines a modular matrix mixer and digital signal processor (DSP) in a compact two rack package. This versatile modular unit is ideal for multi-zone paging, music distribution and room-combining applications and combines an enhanced GUI programming interface with exceptional audio quality. The M-9000M2 enables easily configured custom systems with up to eight mic/line inputs and eight outputs. It has two output channels with built-in DSP, including ten-band parametric EQ, compressor, delay, and more.

Leave a Reply