NX-100S Network Audio Adapter (Standard Version excludes PSU)

This product is a variant of the following item. Click on the link below to see all variants and options:
NX-100 Network Audio Adapter

  • Overview
  • Features
  • Downloads

  • The NX-100S Network Audio Adapter can transmit high-quality audio signals and such control data as control input data over IP networks, such as LAN or Internet, in real time. It is especially useful when transmitting audio signals to remote locations, as Internet use keeps running costs lower than the use of dedicated lines. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard rack (1 unit size).

  • Specification
    Power Source AC adapter AD-246 (optional) or the equivalent
    Power Consumption 7 W (when AD-246 (optional) is used)
    Audio Input 1 channel (transformer-isolated), -58 dB* to 0 dB*,
    balanced (MIC/LINE changeable, volume adjustable with volume control),
    2 kΩ, removable terminal block (3 pins),
    phantom power supply (24 V, can be set with the switch)
    Audio Output 1 channel (transformer-isolated), balanced, 600 Ω,
    removable terminal block (3 pins)
    Frequency Response 50 – 14,000 Hz (when sampling frequency is 32 kHz)
    Distortion Under 0.3% (1 kHz, when sampling frequency is 32 kHz)
    Control Input 8 channels, no-voltage make contact input, open voltage: 12 V DC,
    short-circuit current: 10 mA, removable terminal block (9 pins)
    Control Output 8 channels, open collector output (polarized), withstand voltage: 30 V DC,
    control current: 50 mA max., removable terminal block (9 pins)
    Network I/F 10BASE-T/100BASE-TX, Auto-Negotiation
    Network Protocol TCP, UDP, ARP, ICMP, HTTP, RTP, IGMP
    Audio Packet Transmission System Unicast (Up to 4 simultaneous transmissions),
    Multicast (Up to 64 simultaneous transmissions)
    Operating Temperature 0℃ to +40℃
    Operating Humidity Under 90% RH (no dew condensation should be produced)
    Finish Steel plate, black, 30% gloss
    Dimensions 210 (W) × 44.7 (H) × 188 (D) mm
    Weight 1.2 kg
    Accessory CD (PC Installation & Operation software programs, Instruction manuals)…1,
    Audio I/O removable terminal plug (3 pins)…2, Ferrite clamp…1,
    Control I/O removable terminal plug (9 pins)…2, Bracket mounting screw…8
    Option Rack mounting bracket: MB-15B-BK (for rack mounting one NX-100S unit),
    MB-15B-J (for rack mounting two NX-100S units)
    AC adapter: AD-246

Related Products

MB-15B-J Mounting Bracket

  • Mounting Bracket to mount two “Half Width” products side by side in a 19″ rack.
  • Includes one pair of metal “joining plates” to link two products together.

MB-15B-BK Mounting Bracket

  • “Half Width” Rack Mounting Bracket.
  • Includes half width blank panel to fill the gap left when rack mounting half width products.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.