SR-C8LWP

SR-C8LWP Line Array Speaker

  • Overview
  • Specification
  • Downloads

  • The SR-C8LWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. It can be converted into the bi-amplifier drive system by changing the internal connection.

  • Specification
    Enclosure Bass-reflex type
    Power Handling Capacity Continuous program: 360 W (single-amp mode
    Low: 360 W, High: 180 W (bi-amp mode)
    Rated Impedance 16 Ω (single-amp mode)
    Low: 16 Ω, High: 16 Ω (bi-amp mode)
    Sensitivity 98 dB (1 W, 1 m) (single-amp mode)
    Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode)
    Frequency Response 65 – 20,000 Hz
    Crossover Frequency 1,600 Hz
    Directivity Angle Horizontal: 110゜, Vertical: 5゜
    Speaker Component Low frequency: 20 cm (8″) cone-type
    High frequency: Wave front control horn 110゜ (horizontal) × 5゜ (vertical)” + compression driver × 2
    Connected Cable Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34″), “conductor cross section: 1.25 m㎡ (0.05)” “4-core cable
    Water Protection IPX4
    Finish Enclosure: Plywood, black, urethane coating.
    Front grille: Punched stainless steel, black, paint
    Dimensions 526.6 (W) × 293 (H) × 296 (D) mm (20.73 × 11.54″ × 11.65″)
    Weight 17 kg (37.48 lb)
    Accessory M8 connection bolt

Related Products

SR-SB8

SR-SB8 Rigging Support Bracket

The SR-SB8 Rigging Support Bracket is used to prevent the stacked Line Array Speakers from tipping over. It must be used in conjunction with the optional SR-RF8 Rigging Frame. It comes in a set of 4 brackets.

SR-RF8WP

SR-RF8WP Rigging Frame

The SR-RF8WP Rigging Frame is used for flying the SR-C8LWP, SR-C8SWP, or SR-C15BWP Line array speakers.

SR-TP8

SR-TP8 Tilt Joint Bracket

The SR-TP8 Tilt Joint Bracket is designed to tilt the line array speaker in the lowermost position downward when stacked. It comes in a set of 2 brackets.

Leave a Reply