RS-180

RS-180 Substation weather-resistant and vandal-proof

  • Overview
  • Specification
  • Downloads

  • The RS-180 can call and converse with the registered master stations. It has an indicator lamp and control output channel, and utilises a 2-core shielded cable.

  • Specification
    Rated Input 1 W
    Rated Impedance 625 Ω (1 W/25 V)
    Internal Speaker 4 cm cone-type
    Wiring 2-core with shield
    Control Output Open collector, Withstand voltage: 30 VDC, Control current: 30 mA
    (The open collector output is kept turned on till the conversation is finished after the call button was pressed.)
    Operating Temperature -10 ℃ to +50 ℃
    (Temperature range not to freeze the speaker and switch)
    Finish Panel: Stainless steel, hairline
    Call button: Metal
    Printed circuit board: Weather-resistant coating
    Dimensions 120 (W) × 120 (H) × 58.5 (D) mm
    Weight 570 g
    Accessory Box mounting screw (No.6-32UNC × 8)

Related Products

N-8010RS

N-8010RS Sub-Station Interface Unit

The N-8010RS is a Sub-station Interface Unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master stations connected to the IP intercom exchange and IP master stations. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Leave a Reply