ATT-100VI

Attenuator Board

ATT-100VI

The attenuator board ATT-100V1 is designed to transform a 100 volt signal from a power amplifier’s speaker output to line level. The line level output is isolated from the 100 volt input and can be connected to line level inputs of power amplifiers and other devices. The board can be mounted on DIN rails by using the attached DIN rail brackets.

Designed to transform a 100 volt signal from a power amplifier’s speaker output to line level
The line level output is isolated from the 100 volt input and can be connected to line level inputs of power amplifiers and other devices
Designed for a attenuation ratio of 100 : 1.26, then the output signal is 2 dB above 0 dBV, i.e. 1.26 volt
Can be mounted on DIN rails

Specifications A&E Specs Downloads

Input Impedance

4.3 kohm (equal 2.3 watt @100V)

Minimum Output Load

10 kohm (e.g. 10x VP-series power amp)

Frequency Response

50 Hz to 20 kHz (0/-3 dB, typ.), 100 Hz to 14 kHz (0/-3 dB, min.)

Please download Datasheet to access full specifications.

Attenuator card with transformer for the floating adjustment of 100-Volt signals to line level. The attenuation is customisable by adding resistors.
Frequency response (typ.): 50 Hz to 20 kHz (0/-3 dB)
Input voltage: 100 V ~.
Output voltage: 1.23 V ~.
Load impedance: min 10 kOhm

Please sign in to access further technical materials such as software, firmware or EASE files.